Is Your Home Energy Efficient? 3 Ways Infrared Testing Can Help You Find Out

If you're trying to reduce your energy bills, you might want to do a home energy audit. With a home energy audit, you'll be able to find out exactly where your home is wasting energy. Some issues are simple to remedy – such as using energy-saving lightbulbs, or installing an energy-efficient air conditioner. However, other areas of the home may be a bit more complex to audit. This is particularly true of the insulation in your home.

While you can perform a visual audit of the attic and crawlspace insulation, it can be a bit trickier to inspect the insulation inside the walls. Unfortunately, that's where a lot of your energy waste will come from. Without sufficient insulation in your walls, your home will not hold the proper temperature. This means that your air conditioner and heater will be working overtime to keep you comfortable – which translates into higher energy costs.

That's where infrared testing comes in. Through a process known as infrared testing, an electrician can tell you exactly where the insulation in your home is lacking. Here are three ways infrared testing can be used to point out where you need additional insulation in your home.

Spot Radiometer

When you're looking for problems in specific areas of the home, the spot radiometer is the way to go. With spot radiometry, your home is inspected one spot at a time. The equipment will let you know the exact temperature reading of your home, point by point. When the scan is done, the equipment will have alerted you to each section that isn't properly insulated.

Thermal Line Scanner

The thermal line scanner provides a slightly bigger picture than the spot radiometer. With this technique, a line is superimposed over a digital picture of the area being tested. The line provides a temperature reading of each line tested throughout the structure. This technique will give you a complete picture of the temperature variances inside the walls of your home.

Thermal Imaging Camera

If you want a complete thermal reading of your entire home, a thermal imaging camera should be used. This camera will provide you with a complete thermal outline of your home. Through this test, you'll be able to see exactly where you need to add insulation throughout your house.

If you're trying to make your home more energy efficient, you need to begin with an energy audit. This audit should include infrared testing to ensure that you have adequate insulation throughout your home. The information provided here will help you identify the type of infrared testing you need to have performed. Contact a business, such as Centerline Electric, for more information.   


Share